Differences

This shows you the differences between two versions of the page.

--- en:how_to_upgrade_sdp-1000ex_fw [2019/06/25 03:46] – admin
+++ en:how_to_upgrade_sdp-1000ex_fw [2025/06/12 22:32] (current) – admin
@@ Line 1: / Line 1: @@
   *This instruction is about to upgrade both sDP-1000EX's Main firmware and Audio USB module firmware.
-  * The both firmware upgrade should be done at once.
+  * The both firmware(Main and Audio USB module) upgrade should be done at once.
-===== How to upgrade the Main Firmware of sDP-1000EX =====
+====== How to upgrade the sDP-1000EX firmware ======
+===== Upgrade the Main Firmware =====
 ==== Preparations ====
-  * Download sDP-1000EX's Main firmware.
+  * Download and Extract sDP-1000EX's Main firmware.
-[[http://sotm-audio.com/data/FW/sDP-1000EX/sDP-1000Ex_V2.0a_20190607.hex|sDP-1000Ex_V2.0a_20190607.hex]]
+[[http://sotm-audio.com/data/FW/sDP-1000EX/sDP-1000Ex_V2.1_20190705.zip|sDP-1000Ex_V2.1_20190705.zip]]
   * Download and install Flip software for the firmware upgrade.
 [[http://ww1.microchip.com/downloads/en/DeviceDoc/JRE%20-%20Flip%20Installer%20-%203.4.7.112.exe|Flip 3.4.7 software]]
@@ Line 21: / Line 22: @@
 Run Flip program.
 {{:ko:1.jpg?400|}}
@@ Line 46: / Line 48: @@
 ==== Finish upgrading the main firmware  ====
-업데이트가 완료되면, 전원을 끄고 sDP-1000EX 뒷면 Audio USB 포트 옆에 있는 빨간색 스위치를 다시 Audio로 변경하고 전원을 켭니다 Once the main firmware upgrade is finished, .
+Once the main firmware upgrade is finished, change the position of the red switch to Audio side, and turn on the device. Then, the OLED display normally.
-  * 정상적으로 Audio 모드로 변경되었다면, 전면 OLED가 정상적으로 켜집니다.
+  * If, the OLED displays nothing, check the position of the red switch again, then turn on the device.
-  * 만약, 전면 OLED이 켜지지 않는다면, 스위치를 다시한번 확인하시고 전원을 켜시기 바랍니다.
 {{:ko:11.jpg?400|}}
-===== Audio USB 펌웨어 업그레이드 하기 =====
+===== Upgrade Audio USB module firmware =====
-==== 준비 ====
+==== Preparation ====
-  * 아래의 링크에서 Audio USB 펌웨어를 다운로드 합니다.
+  * Download the Audio USB module firmware.
-[[http://sotm-audio.com/data/FW/sDP-1000EX/sDP-1000EX_USB_V6.C1_20190604.bin|sDP-1000EX_USB_V6.C1_20190604.bin]]
+[[http://sotm-audio.com/data/FW/sDP-1000EX/app_usb_aud_l1_2xoxs_v6.c2.bin|app_usb_aud_l1_2xoxs_v6.c2.bin]]
-  * SOtM 전용 드라이버가 설치되어 있지 않은 상태이면, 다음의 링크에서 드라이버를 다운 받아 설치 합니다.
+  * If the SOtM driver for Windows OS is not installed, download and install it to the PC properly.
 [[http://www.sotm-audio.com/files/Drivers/SOtM_USB_Audio_2.0_Driver_v2.23.0.zip?f8ee08&f8ee08|SOtM USB Audio 2.0 Driver v2.23.0]]
-==== SOtM USB Audio Firmware Upgrade 실행 ====
+==== Upgrade SOtM USB Audio Firmware ====
-  - sDP-1000EX을 PC와 USB 케이블로 연결한 후 sDP-1000EX의 전원을 켭니다.
+  - Connect sDP-1000EX to PC by a USB cable, and turn on the sDP-1000EX.
-  - SOtM USB Audio Firmware Upgrade 프로그램이 실행합니다.
+  - Run SOtM USB Audio Firmware Upgrade(It is installed together when you installed the windows driver to Windows OS)
 {{:ko:6.jpg?400|}}
-==== 펌웨어 파일 선택하기 ====
+==== Select the firmware file ====
-'Browse 버튼을 클릭하고, 다운로드 한 펌웨어를 선택합니다.
+Click Browse button and select the downloaded firmware.
 {{:ko:7.jpg?400|}}
-==== 펌웨어 업데이트 하기 ====
+==== Update the firmware ====
-'Start' 버튼을 클릭하여 펌웨어를 업데이트 합니다.
+Click Start button to update the firmware.
 {{:ko:8.jpg?400|}}
-==== 마무리하기 ====
+==== Finish upgrading the USB audio firmware ====
-업데이트가 완료되면, SOtM USB Audio Control Panel을 실행하여 sDP-1000EX의 펌웨어 버젼을 확인합니다.
+Run SOtM USB Audio Control Panel and check the firmware version of sDP-1000EX.
 {{:ko:9.jpg?400|}}
-===== 다운로드 =====
+===== Download =====
-==== sDP-1000EX FW 파일 ====a
+==== sDP-1000EX FW file ====
-  * [[http://sotm-audio.com/data/FW/sDP-1000EX/sDP-1000Ex_V2.0a_20190607.hex|sDP-1000Ex_V2.0a_20190607.hex]]
-  * [[http://sotm-audio.com/data/FW/sDP-1000EX/sDP-1000EX_USB_V6.C1_20190604.bin|sDP-1000EX_USB_V6.C1_20190604.bin]]
-==== 유틸리티 ====
-  * [[http://ww1.microchip.com/downloads/en/DeviceDoc/JRE%20-%20Flip%20Installer%20-%203.4.7.112.exe|Flip 3.4.7 software]]
-  * [[http://www.sotm-audio.com/files/Drivers/SOtM_USB_Audio_2.0_Driver_v2.23.0.zip?f8ee08&f8ee08|SOtM USB Audio 2.0 Driver v2.23.0]]
+  * [[https://drive.google.com/file/d/1Q1xt2iD-BOBxVFSZLXaGhbgKXLMLsEXf/view?usp=sharing|sDP-1000Ex_V2.1_20190705.zip]]
+  * [[https://drive.google.com/file/d/1u424lpKoN4NIGSyu4_4cQjXlNma29Hb5/view?usp=sharing|app_usb_aud_l1_2xoxs_v6.c2.bin]]
+==== Utilities ====
+  * [[https://drive.google.com/file/d/17aKetI0CJA4wW6p3FhWnCmXpsUWkbILh/view?usp=sharing|Flip 3.4.7 software]]
+  * [[https://drive.google.com/file/d/1vF33ahLgm7DEgUY8uR3pBh4EhER1t3bC/view?usp=sharing|SOtM USB Audio 2.0 Driver v2.23.0]]

SOtM docs

Page Tools

Site Tools

User Tools

Differences