This is an old revision of the document!
Table of Contents
Make the USB installation disk
Download the Eunhasu ISO image file
To download the Eunhasu image file, please send the serial number of your unit to the email address below: info@sotm-audio.com
Download Rufus program
Preparation
- Prepare a 8GB(or above size) USB disk
- Write in DD Image mode
Install Eunhasu OS to the sMB-Q370
Connect the USB disk to the USB port of the sMB-Q370
Connect a LCD monitor by a HDMI cable to the sMB-Q370
Connect a USB keyboard to the sMB-Q370 and turn on the PC
Hit a F7 button continuously while booting to go to booting disk selection windows
Select the USB disk and continue booting
Select the first string in Clonezilla windows
Clonezilla live with img Eunhasu-V0.5.5_sMB-Q370_60G_2023-11-29-01-img (VGA 800×600)
Select the installation disk
- if your disk is M.2(NVME) Disk, select nvme0n1 or nvme0n2
- if your disk is SATA Disk, select sda or sdb
Select Y or hit Enter if asked whether to continue installations
Once finished installations, reboot the PC
Expand Partition
Login to Eunhasu console
(ID: root / P/W: sotmaudio)
Once Logged in, enter "mc" to continue
Access to /root/install folder
- if you use M.2(NVME) Disk, run setup_nvme.sh file.
- if you use SATA Disk, run setup_sata.sh file.