1. First, download the Vortexbox 2.3 OS https://drive.google.com/open?id=0B8NxBL8eTX11OC1SdHREN2VOYTQ

2. Make the boot up USB memory stick Please refer to the link below, https://rufus.akeo.ie/?locale=en_US

3. Connect a monitor and keyboard to sMS-1000, and connect the USB memory stick to the unit (the network cable should be connected to the unit)

4. Power on the unit and press 'F10' to enter the booting disk selection menu, you can select the USB memory stick.

5. Please refer to the image attached, you can select the First menu (Install Vortexbox) and it will start the installation automatically. (Network must be connected online when you are installing)

6. Wait until the login information is appeared and the Vortexbox2.3 installation is done and you can connect network.