SOtM docs

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
tx-usbhub [2016/09/07 22:16] – created sanghoontx-usbhub [2016/09/09 04:24] (current) sanghoon
Line 1: Line 1:
 ====== tX-USB hub ====== ====== tX-USB hub ======
  
-====== 주의 사항 ====== +{{:tx-usbhubex_1.jpg?300}}{{:tx-usbhubin_1.jpg?300}} 
-**반드시 본 사용설명서를 모두 읽은 후 제품을 사용하십시오.** + 
-  제품의 분해, 개조 등을 하지 마십시오.  +====== Precaution ====== 
-  * 제품에 진동, 충격을 가하지 마십시오+ 
-  * 손상 되거나 피복이 벗겨진 cable은 사용하지 마십시오+**Please read this instruction carefully before use.** 
-  * 제품을 야외에서 사용하지 마십시오+ 
-  * 제품의 외관, 내용물, 사양은 예고 없이 변경 될 수 있습니다.  +   Do not attempt to disassemble or modify the product
-====== 기본 구성품 ====== +  * Keep the product away from the external shocks or vibrations
-  * tX-USBhub 본체 +  * Do not use the damaged or peeled cables
-  * 사용 설명서+  * Do not use the unit outdoors
 +  * Product specifications and features are subject to change without notice. 
 + 
 +====== Supplied components ====== 
 + 
 +  * tX-USBhubEX Unit 
 +  * Operating instruction 
 + 
 +<pagebreak> 
 +====== Specification ======
  
-====== 제품 사양 ====== 
   * USB host interface port   * USB host interface port
-    * USB 2.0 Type B connector+      * USB 2.0 Type B connector
   * USB output Port   * USB output Port
-    * Type A USB 2.0 connector x 2 +      * Type A USB 2.0 connector x 2 
-    * USB port power on/off switch x 2+      * USB port power on/off switch x 2
   * USB interface chip set   * USB interface chip set
-    * USB 2.0 Compliant HUB controller +      * USB 2.0 Compliant HUB controller 
-    * HS(480 Mbps), FS(12 Mbps), LS(1.5 Mbps) support+      * HS(480 Mbps), FS(12 Mbps), LS(1.5 Mbps) support
   * Power input   * Power input
-    * Input voltage : +6.5V ~ +9Vdc +      * Input voltage : +6.5V ~ +9Vdc 
-    * Input current : 2A max +      * Input current : 2A max 
-    * 5.5mm OD, 2.1mm ID adaptor jack+      * 5.5mm OD, 2.1mm ID adaptor jack
   * USB port output power   * USB port output power
-    * Output voltage : +5.0V(+0.5V, -0.25V) +      * Output voltage : +5.0V(+0.5V, -0.25V) 
-    * Over current protect : 0.8A at 20°C +      * Over current protect : 0.8A at 20°C 
-    * Recommend output current : 0.5A >+      * Recommend output current : 0.5A >
   * Operating environment   * Operating environment
-    * Operating temperature : +10 ~ +30℃ +      * Operating temperature : +10 ~ +30℃ 
-    * Storage temperature : 0 ~ +40℃ +      * Storage temperature : 0 ~ +40℃ 
-    * Operating & storage humidity : 10% ~ 90%+      * Operating & storage humidity : 10% ~ 90% 
 + 
 +====== Product Outline ====== 
 + 
 +{{:tx-usbhub_ports.jpg?400}} 
 + 
 +  - USB output port no. 1 : Connect to USB audio device. 
 +  - Power switch of USB output port no. 1 : Switch ON, if the connected USB audio device requires USB power. If not, switch OFF. 
 +  - USB output port no. 2 : Connect to USB audio device. 
 +  - Power switch of USB output port no.2 : Switch ON, if the connected USB audio device requires USB power. If not, switch OFF. 
 +  - Power input jack : The power, 6.5Vdc ~ 9Vdc, 2A, is required to operate the unit. (jack size : 5.5mm OD, 2.1mm ID) A supplied 9V/2A adopter, mBPS-d2s or sPS-1000 can be used. 
 +  - USB input port : Connect to an USB port of your PC or server by USB cable (Type A - to - Type B). 
 + 
 +**Recommend using one of USB ports only. If you use both USB ports at the same time, sound quality may degrade.** 
 + 
 +<pagebreak> 
 +====== Product user guide ====== 
 + 
 +{{:tx-usbhub_usage_en.png?600}} 
 + 
 +  * tX-USBhubEX is 2 ports USB2.0 external hub designed for the best USB audio performance. 
 +  * Put the unit on a proper place, and connect to an USB port of PC or server by USB cable (Type A - to - Type B) 
 +  * Connect the supplied 9Vdc, 2A power wall adopter, mBPS-d2s or sPS-1000 power supply to the power input jack to operate the unit. 
 +  * And then the green LED of the unit will be lit on and automatically recognized as a USB hub without additional driver installation. 
 +  * If the connected USB audio device requires +5V, switch ON the power switch, if not, switch OFF. 
 +  * Connect one of USB output ports to USB Audio device by USB cable(Type A - to - Type B) 
 + 
 +<pagebreak> 
 +====== Warranty Information ====== 
 + 
 +===== Free warranty service ===== 
 + 
 +  * In case of the defect is found caused by the design or the production flaw while using the device properly, a manufacturer is responsible for the faulty product and the free warranty service for 1 year from the date of purchasing. 
 +  * Even in the warranty service period, malfunction or damage of products caused by the inevitable incident such as a natural disaster is not subject of the free warranty service. 
 + 
 +===== Warranty service at a cost ===== 
 + 
 +  * The product that free warranty service period is expired. 
 +  * Malfunction of the product caused by a user’s fault. 
 +  * Malfunction of the product caused by incidents. 
 +  * Malfunction of the product caused by a natural disaster such as earthquake, flood, lightning & etc. 
 +  * In case of the warranty service at a cost, a customer should cover the transportation costs. 
 + 
 +===== Samples of a user’s fault ===== 
 + 
 +  * In case of attempts to disassemble or modify the device 
 +  * In case of not following the instructions on this manual 
 + 
 +Please read this operating instructions & Q&A board on our website carefully before asking for the warranty service.
  
-====== A/S ====== 
-===== 무상 A/S ===== 
-  * 정상적인 사용 중 설계, 제조상의 결함으로 발생된 불량에 대하여 구입일로부터 1년간 A/S를 보증 합니다. 
-  * 무상 A/S기간 중 이라도 천재지변 등 불가 항력적인 요인으로 인한 제품의 고장 및 파손은 무상 A/S대상에서 제외 됩니다. 
-===== 유상 A/S ===== 
-  * 무상 A/S기간이 지난 제품 
-  * 소비자 과실로 인한 제품의 고장 
-  * 사고로 인한 제품 고장 
-  * 지진, 수해, 낙뢰 등 천재지변으로 인한 제품의 고장 
-  * 유상 A/S의 운송비는 소비자 부담 
-===== 소비자 과실 유형 ===== 
-  * 제품의 분해, 개조 등을 한 제품 
-  * 사용설명에 명시된 사용방법 미 준수로 인한 불량 
  
-A/S를 의뢰하기 전 본 사용설명서와 홈페이지 제품 상세 페이지의 Q&A항목을 충분히 검토 하시기 바랍니다.