SOtM docs

Trace:

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
sclk_ex_firmware [2024/12/29 20:25] – [How to upgrade the sCLK-EX firmware] adminsclk_ex_firmware [2025/07/25 04:27] (current) – admin
Line 2: Line 2:
   *The example in this instruction uses the sCLK-EX installed into the tX-USBultra.   *The example in this instruction uses the sCLK-EX installed into the tX-USBultra.
   *Request the firmware before following this instruction, it costs money. To request the firmware, provide us the serial number of your sCLK-EX and which frequencies you want to add or edit.   *Request the firmware before following this instruction, it costs money. To request the firmware, provide us the serial number of your sCLK-EX and which frequencies you want to add or edit.
-  *Refer to the video for better understanding about the procedure, http://sotmaudio.myDS.me:5000/sharing/NtEtpADNK+  *Refer to the video for better understanding about the procedure, http://sotmaudio.myds.me:5000/sharing/siRukteb3
  
 ====== How to upgrade the sCLK-EX firmware ====== ====== How to upgrade the sCLK-EX firmware ======
Line 8: Line 8:
 1. Download the firmware designed as per your request in your PC. 1. Download the firmware designed as per your request in your PC.
  
-2. Download and install Atmel Flip software, [[http://sotmaudio.myDS.me:5000/sharing/1BUkivoLH]].+2. Download and install Atmel Flip software, [[https://www.microchip.com/en-us/development-tool/flip]].
  
 3. Prepare the proper cable to be connected to the red box position on the sCLK-EX. 3. Prepare the proper cable to be connected to the red box position on the sCLK-EX.
Last modified: 2024/12/29 20:25

Copyright © 2008-2017 SOtM. All rights reserved.