Differences

This shows you the differences between two versions of the page.

--- en:how_to_upgrade_another_way [2016/12/06 02:49] – created sanghoon
+++ en:how_to_upgrade_another_way [2016/12/06 06:07] (current) – [By USB] admin
@@ Line 1: / Line 1: @@
-Another upgrade process
+This instruction is for Eunhasu upgrade which is not able to upgrade by clicking the upgrade button on the Eunhasu upgrade page.
-====== By samba ======
-  - Download upgrade-last.tar file from server
-    * [[http://sotm-audio.com/eunhasu/upgrade/sotm/armv7l/release/upgrade-last.tar|sMS-200]]
-    * [[http://sotm-audio.com/eunhasu/upgrade/sotm/x86_64/release/upgrade-last.tar|sMS-1000SQ]]
-  - Copy upgrade-last.tar to Eunhasu samba directory \\eunhasu\mw\data\music
-  - Eunhasu page load like http://eunhasu/upgrade.php?upgrade_server=eunhasu/music&force=1
-    - //upgrade_server={EUNHASU_IP}/music// is possible
+There are 3 ways to do the upgrade.
+First, [[https://en.wikipedia.org/wiki/Samba_(software)|Samba]] : It is for Windows file sharing protocol. To access sMS-200 through SMB, type [[\\eunhasu\mwdata\music|\\eunhasu\mwdata\music]] in windows file explorer. The sMS-200 should be connected in the same network.
+Second, USB memory stick : It is internal debug mode. To use this method for the upgrade, several conditions should be matched.
+Finally, imageUSB utility : This is external application to write entire image of the latest version to SD card.
+======   ======
+====== By samba share ======
+  - Download upgrade-last.tar file from server
+      * [[http://sotm-audio.com/eunhasu/upgrade/sotm/armv7l/release/upgrade-last.tar|sMS-200]]
+  - Copy upgrade-last.tar to Eunhasu samba directory [[\\eunhasu\mwdata\music|\\eunhasu\mwdata\music]]
+  - Eunhasu page will be loaded like  [[http://eunhasu/upgrade.php?upgrade_server=eunhasu/music&force=1|http://eunhasu/upgrade.php?upgrade_server=eunhasu/music&force=1]]
+      - //upgrade_server={EUNHASU_IP}/music//  is possible
 ====== By USB ======
   - Format USB to FAT32
-  - Change USB label to SOTMDEBUG and it must upper case
+  - Change USB label to SOTMDEBUG and it must be upper case
   - Download upgrade-last.tar file from server
-    * [[http://sotm-audio.com/eunhasu/upgrade/sotm/armv7l/release/upgrade-last.tar|sMS-200]]
+      * [[http://sotm-audio.com/eunhasu/upgrade/sotm/armv7l/release/upgrade-last.tar|sMS-200]]
-    * [[http://sotm-audio.com/eunhasu/upgrade/sotm/x86_64/release/upgrade-last.tar|sMS-1000SQ]]
+  - Copy the downloaded upgrade-last.tar to the USB root directory
-  - Copy downloaded upgrade-last.tar to the USB root directory
+  - Download [[http://docs.sotm-audio.com/lib/exe/fetch.php?media=en:run_debug.txt.doc|this file]] and rename to run_debug.txt
-  - Make file named run_debug.txt in the USB
+  - Copy run_debug.txt to the USB root directory
-  - run_debug.txt file must contain following strings
+  - run_debug.txt file must contain following strings <code>upgrade force</code>
-<code>upgrade force</code>
+  - Remove whole inserted USB stick on sMS-200
+  - Insert SOTMDEBUG USB to sMS-200
+  - On working, blink the left LED
+  - After finishing, the left LED off
 ====== By external utility ======
-[[en:how_to_enable_gigabit_ethernet_in_sms-200#Software|Refer Here]]
+  * sMS-200 - [[:en:how_to_enable_gigabit_ethernet_in_sms-200#software|Refer Here]]

SOtM docs

Page Tools

Site Tools

User Tools

Differences