SOtM docs

Trace:

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision		Previous revision
en:how_to_install_dx-usb_hd_driver [2016/11/17 22:37] – created sanghoonen:how_to_install_dx-usb_hd_driver [2024/02/20 02:56] (current) – [Download] admin
Line 1: Line 1:
 ====== Download ====== ====== Download ======
-Download dX-USB HD windows driver file from http://www.sotm-audio.com/sotmwp/english/portfolio-item/dx-usb-hd/+Download the dX-USB HD windows driver file from http://www.sotm-audio.com/sotmwp/english/portfolio-item/dx-usb-hd/
  
 +Click here to see the installation video, https://drive.google.com/file/d/1lD6Z-KeX8YV5poR2zslvm2yGrVjRH_0V/view?usp=sharing
 ====== Install ====== ====== Install ======
-Unzip downloaded file and run setup.exe+Unzip the downloaded file and run setup.exe
  
-Please click "Next" button to proceed the next steps +Please click the "Next" button to proceed to the next steps 
-{{ :en:capture_20161118120901.png |}}+{{ :en:capture_20161118120901.png }}
  
-Checking system status. Please connect the unit to PC by USB cable and make sure the unit is in operation status. +Checking system status. Please connect the unit to a PC by USB cable and make sure the unit is operational. 
-{{ :en:capture_20161118120910.png |}}+{{ :en:capture_20161118120910.png }}
  
-And installation is started. Press the "Next" button to go to the final stage once the setup is completed. +Installation is started. Press the "Next" button to go to the final stage once the setup is completed. 
-{{ :en:capture_20161118120954.png |}}+{{ :en:capture_20161118120954.png }}
  
 <note important> <note important>
-Caution : Depends on USB audio class 2.0 driver version, the unit should be connected to PC by USB cable, and install the driver while the unit is in operation.+Caution : This depends on USB audio class 2.0 driver version, the unit should be connected to PC by USB cable, and install the driver while the unit is in operation.
 </note> </note>
  
-To complete the installation the driver, please click the "Finish" button. +To complete the installation of the driver, please click the "Finish" button. 
-{{ :en:capture_20161118121021.png |}}+{{ :en:capture_20161118121021.png }}
  
 ====== Control Panel ====== ====== Control Panel ======
 +SOtM USB Audio Control Panel’s icon will appear on the task bar once the installation has finished.
 +{{ :en:capture_20161118121245.png }}
 +
 +Please double click the Control Panel icon and then the driver information will appear, you can check the driver version information and etc.
 +{{ :en:capture_20161118121254.png }}
 +
 +If you select "Buffer Settings", you can adjust the streaming Buffer Size and ASIO Buffer Size.
 +{{ :en:capture_20161118121623.png }}
 +
 +The Volume Control will be shown as the below image, and you can control the maximum(0dB) and minimum(Mute) values by the buttons or the slide bars.
 +{{ :en:capture_20161118121555.png }}
 +
 +====== Upgrade Firmware ======
 +Start the firmware upgrade application.
 +{{ :en:capture_20161118121900.png }}
 +
 +Firmware upgrade application window.
 +{{ :en:capture_20161118121657.png }}
 +
 +Select the firmware file and start the upgrade.
 +{{ :en:capture_20161118122009.png }}
 +
 +Finish upgrade.
 +{{ :en:capture_20161118122026.png }}
 +
 +You can see the result of the upgrade in the control panel.
 +{{ :en:capture_20161118122106.png }}
 +
 +
  
Last modified: 2016/11/17 22:37

Copyright © 2008-2017 SOtM. All rights reserved.