Differences

This shows you the differences between two versions of the page.

--- en:how_to_enable_gigabit_ethernet_in_sms-200 [2017/01/10 20:54] – sanghoon
+++ en:how_to_enable_gigabit_ethernet_in_sms-200 [2020/01/07 16:09] (current) – [Remove 'C670' Chip Capacitor] admin
@@ Line 5: / Line 5: @@
 ===== Disassemble the front case =====
-Unscrew 4 points of Torx screws as like the image below. {{  :en:how_to_enable_gigabit_ethernet_in_sms-200_hw1.png  }}
+Unscrew the 4 Torx screws as shown. {{  :en:how_to_enable_gigabit_ethernet_in_sms-200_hw1.png  }}
 ===== Disassemble the LED board =====
@@ Line 13: / Line 13: @@
 ===== Disassemble the rear case =====
-Unscrew 4 points of Torx screws as like the image below. {{  :en:how_to_enable_gigabit_ethernet_in_sms-200_hw3.png  }}
+Unscrew the 4 Torx screws as shown. {{  :en:how_to_enable_gigabit_ethernet_in_sms-200_hw3.png  }}
 ===== Remove 'C670' Chip Capacitor =====
-Pull out the rear case very carefully to disassemble the main board from the body case. Remove 'C670' by a soldering machine. If required, the power board can be disassembled. {{  :en:how_to_enable_gigabit_ethernet_in_sms-200_hw4.jpg  }}
+Pull out the rear case very carefully to disassemble the main board from the body case. Remove 'C670' with a soldering iron. If necessary, the power board can be disassembled. {{  :en:how_to_enable_gigabit_ethernet_in_sms-200_hw4.jpg  }}
 ===== Assemble sMS-200 cases =====
@@ Line 25: / Line 25: @@
 ====== Software ======
-Change the micro SD card image
+To change the micro SD card image, please refer to [[en:eunhasu:burn_sdcard_image|'burn sdcard image']] page.
 ===== Windows =====
 ==== Preparation ====
-  - Download the new micro SD card image in the link below. Please be noted the image file is quite big (7.4GB BIN file) [[https://drive.google.com/open?id=0B-WWiikMNlOIODd4T3VIeVpzRm8|20161206-RC5(V0.2.8).bin]]
+  - Download the new micro SD card image in the link below. Please be noted the image file is quite big (7.4GB BIN file) [[https://drive.google.com/open?id=0B-WWiikMNlOIYlh3RER5bGJNRlk|20170112-RC6_V0.3.0.bin]]
   - Download the [[http://www.osforensics.com/downloads/imageusb.zip|imageUSB]] utility and unzip.
   - Take out the micro SD card from the rear case of sMS-200 and insert to the USB port by using the micro SD card reader.
@@ Line 57: / Line 57: @@
 ===== macOS =====
-https://www.thefanclub.co.za/how-to/dd-utility-write-and-backup-operating-system-img-files-memory-card-mac-os-x#downloads
+==== Preparation ====
+  - Download the new micro SD card image in the link below. Please be noted the image file is quite big (7.4GB img file) [[https://drive.google.com/open?id=0B-WWiikMNlOIekhEVkhzX1lCMm8|20170112-RC6_V0.3.0.dd.img]]
+  - Download dd-utility from [[https://www.thefanclub.co.za/how-to/dd-utility-write-and-backup-operating-system-img-files-memory-card-mac-os-x#downloads|here]] or [[https://github.com/thefanclub/dd-utility/tree/master/DMG|github]]. And install it.
+  - Eject the micro SD card from the rear case of sMS-200 and insert to PC USB port by using the micro SD card reader.
+==== Start Restore====
+Click 'Restore' and select downloaded .img file.
+{{ :en:screenshot_2017-01-12_3.50.56.png |}}
+Select SD card.
+{{ :en:screenshot_2017-01-12_3.51.48.png |}}
+And start.
+{{ :en:screenshot_2017-01-12_3.52.02.png |}}
+You can see progress.
+{{ :en:screenshot_2017-01-12_10.48.10.png |}}
+After done, insert the SD card to sMS-200 rear.
+You can also use command-line by terminal instead of dd utility. Refer to [[https://www.cyberciti.biz/faq/how-to-create-disk-image-on-mac-os-x-with-dd-command/|here]].

SOtM docs

Page Tools

Site Tools

User Tools

Differences