SOtM docs

Trace: › sclk_ex_firmware

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
en:eunhasu_operation_instructions [2016/11/22 22:33] – sanghoonen:eunhasu_operation_instructions [2017/09/25 23:44] (current) – sanghoon
Line 1: Line 1:
 +<note important>THIS PAGE IS OUT OF DATE. PLEASE MOVE ON TO [[en:eunhasu:start]] PAGE.</note>
 +
 ====== Features ====== ====== Features ======
 +
   * Web GUI   * Web GUI
       * Easy system configuration       * Easy system configuration
Line 6: Line 9:
       * Network share folder and USB storage device setting       * Network share folder and USB storage device setting
   * Roon Ready   * Roon Ready
-  * Roon Server 
-  * MinimServer 
   * DLNA audio renderer, OpenHome support   * DLNA audio renderer, OpenHome support
   * MPD(Music Player Daemon)   * MPD(Music Player Daemon)
Line 17: Line 18:
  
 ====== Eunhasu Web GUI Usage ====== ====== Eunhasu Web GUI Usage ======
-===== Connection =====  
-Open the web browser on a PC or smart device and connect to http://eunhasu . On MAC OSX, connect to http://eunhasu.local . You can get Eunhasu device’s IP address or link from http://sotm-audio.com/my if you’re using Android device. It's working based on IPv4 network. If either of above paths would not make connection to Eunhasu Web GUI, check the router setup to find out the IP address of sMS-200. And then enter sMS-200 IP address like http://xxx.xxx.xxx.xxx directly on the browser to connect to Eunhasu Web GUI. 
-If you still couldn’t access the Eunhasu Web GUI, you will need to check network status or power connection is okay. If you connect to Eunhasu Web GUI successfully, you will see the home screen as like the image below. 
  
-{{ :en:스크린샷_2016-11-14_14.18.54.png?400 | euhnasu home}}+===== Connection =====
  
-===== Select functions ===== +Open the web browser on a PC or smart device and connect to [[http://eunhasu|http://eunhasu]] . On MAC OSX, connect to [[http://eunhasu.local|http://eunhasu.local]] . You can get Eunhasu device’s IP address or link from [[http://sotm-audio.com/my|http://sotm-audio.com/my]] if you’re using Android device. It's working based on IPv4 network. If either of above paths would not make connection to Eunhasu Web GUI, check the router setup to find out the IP address of sMS-200. And then enter sMS-200 IP address like [[http://xxx.xxx.xxx.xxx|http://xxx.xxx.xxx.xxx]] directly on the browser to connect to Eunhasu Web GUI. If you still couldn’t access the Eunhasu Web GUI, you will need to check network status or power connection is okay. If you connect to Eunhasu Web GUI successfully, you will see the home screen as like the image below.
-To select the function on the Web GUI, mouse over the desired icon and then action buttons                            will be appeared. On the smart devices, touch over the desired player icon and then the action buttons will be appeared like when using a mouse.+
  
-{{ :en:스크린샷_2016-11-14_14.42.07.png?400 | select functions}}+{{  :en:스크린샷_2016-11-14_14.18.54.png?400  }}
  
-==== Roon Ready ==== +===== Select functions =====
-Roon Ready is the easy and user friendly network music file player working with Roon Server, it provides the most powerful music playback function. By clicking Play, Stop, Restart or Configuration buttons over the icon, you can control Roon Ready on sMS-200. Please refer to how to use Roon Ready on this manual.+
  
-==== Roon Server ====+To select the function on the Web GUI, mouse over the desired icon and then action buttons will be appeared. On the smart devices, touch over the desired player icon and then the action buttons will be appeared like when using a mouse.
  
-Roon Server is made of Roon Core and Output. Roon Server has no GUI but it controlled by other device installing Roon Control. The Roon Server installed machine can manage music library and audio outputs. You can read more about Roon Server at [[https://roonlabs.com/howroonworks.html|Roonlabs]] site.+{{  :en:스크린샷_2016-11-14_14.42.07.png?400  }}
  
-==== MinimServer ==== +==== Roon Ready ==== 
-[[http://minimserver.com/features.html|MinimServer]] is one of the most famous and powerful UPnP AV music server.+ 
 +Roon Ready is the easy and user friendly network music file player working with Roon Server, it provides the most powerful music playback function. By clicking Play, Stop, Restart or Configuration buttons over the icon, you can control Roon Ready on sMS-200. Please refer to how to use Roon Ready on this manual.
  
 ==== Squeezelite ==== ==== Squeezelite ====
 +
 Squeezelite is a network music file player working with Logitech Media Server, it is integrated with versatile services such as Tidal, Qobuz or internet radios. By clicking Play, Stop, Open LMS web interface, Restart or Configuration buttons over the icon, you can control Squeezelite on sMS-200. Please refer to how to use Squeezelite on this manual. Squeezelite is a network music file player working with Logitech Media Server, it is integrated with versatile services such as Tidal, Qobuz or internet radios. By clicking Play, Stop, Open LMS web interface, Restart or Configuration buttons over the icon, you can control Squeezelite on sMS-200. Please refer to how to use Squeezelite on this manual.
  
 ==== MPD & DLNA ==== ==== MPD & DLNA ====
 +
 MPD is a music file player supports playing the music file saved on USB storage device or network share folder. And DLNA is a DLNA audio renderer working with DLNA server and DLNA control point throughout MPD function. It is capable to play music files with various devices like most PC, NAS or smart devices which have the DLNA server function. By clicking Play, Stop, Restart or Configuration buttons over the icon, you can control MPD & DLNA on sMS-200. Please refer to how to use MPD & DLNA on this manual. MPD is a music file player supports playing the music file saved on USB storage device or network share folder. And DLNA is a DLNA audio renderer working with DLNA server and DLNA control point throughout MPD function. It is capable to play music files with various devices like most PC, NAS or smart devices which have the DLNA server function. By clicking Play, Stop, Restart or Configuration buttons over the icon, you can control MPD & DLNA on sMS-200. Please refer to how to use MPD & DLNA on this manual.
  
 ==== HQPlayer NAA ==== ==== HQPlayer NAA ====
 +
 HQPlayer NAA is allowed to transport data or control flow between HQPlayer Desktop and DAC. HQPlayer NAA is allowed to transport data or control flow between HQPlayer Desktop and DAC.
  
 ==== Shairport ==== ==== Shairport ====
 +
 Shairport is Apple's AirPlay clone implementation. It can share music from Apple's iDevices. Shairport is Apple's AirPlay clone implementation. It can share music from Apple's iDevices.
  
 ==== System Setup ==== ==== System Setup ====
 +
 Network configuration, library configuration, system upgrade, restart and power off functions are available on this icon. Network configuration, library configuration, system upgrade, restart and power off functions are available on this icon.
  
 === Network Config === === Network Config ===
 +
 Set up the sMS-200 Network configuration. Set up the sMS-200 Network configuration.
  
-{{ :en:스크린샷_2016-11-14_14.40.38.png?400 | network config}}+{{  :en:스크린샷_2016-11-14_14.40.38.png?400  }}
  
   * Host name: A name of sMS-200 appearing on the network. If you use multiple sMS-200s on the network, you will need to use different host name for each sMS-200.   * Host name: A name of sMS-200 appearing on the network. If you use multiple sMS-200s on the network, you will need to use different host name for each sMS-200.
Line 64: Line 67:
  
 === Library Config === === Library Config ===
 +
 Set up the path for network library and enable the USB storage device to use. Set up the path for network library and enable the USB storage device to use.
  
-{{ :en:스크린샷_2016-11-14_14.48.26.png?400 | library config}}+{{  :en:스크린샷_2016-11-14_14.48.26.png?400  }}
  
-  * NAME: A library folder name appearing on Logitech Media Server or MPD. +  * NAME: A library folder name appearing on Logitech Media Server or MPD.
   * PATH: A network sharing folder path. The path should be like following format.   * PATH: A network sharing folder path. The path should be like following format.
-    * <code>//SERVER_NAME_OR_IP/SHARED_FOLDER_NAME</code>+      * 
 +<code> 
 +//SERVER_NAME_OR_IP/SHARED_FOLDER_NAME 
 +</code> 
   * ID: Enter an ID if it is required to access the network sharing folder.   * ID: Enter an ID if it is required to access the network sharing folder.
   * PW: Enter a password if it is required to access the network sharing folder.   * PW: Enter a password if it is required to access the network sharing folder.
Line 77: Line 85:
   * Remove: Remove the information you entered.   * Remove: Remove the information you entered.
   * Automatic USB storage mount: Enable or disable the USB storage device, up to 2 USB storage devices can be used.   * Automatic USB storage mount: Enable or disable the USB storage device, up to 2 USB storage devices can be used.
-  * Check 'Automatic USB storage mount' to be enabled, the USB storage device will be auto-recognized and assign music folder on Logitech Media Server or MPD as USB1 or USB2.  +  * Check 'Automatic USB storage mount' to be enabled, the USB storage device will be auto-recognized and assign music folder on Logitech Media Server or MPD as USB1 or USB2.
   * Save changes: Save the new or modified information you entered.   * Save changes: Save the new or modified information you entered.
 +
 <note tip>NOTE: The new network share folder information can be added after saving the current entered information.</note> <note tip>NOTE: The new network share folder information can be added after saving the current entered information.</note>
 +
   * Cancel: Go back to the home screen.   * Cancel: Go back to the home screen.
  
 === System Upgrade === === System Upgrade ===
 +
 Upgrade sMS-200 software. Upgrade sMS-200 software.
  
-{{ :en:스크린샷_2016-11-14_14.51.11.png?400 | system upgrade}}+{{  :en:스크린샷_2016-11-14_14.51.11.png?400  }}
  
   * Last version information: Display the latest software information.   * Last version information: Display the latest software information.
Line 91: Line 102:
   * Already installed last version. No need to Upgrade: Display whether the upgrade is needed or not by comparing the version of the latest software and current software you are currently using. If the upgrade is needed, it will display as "Upgrade will stop all applications and take a long time".   * Already installed last version. No need to Upgrade: Display whether the upgrade is needed or not by comparing the version of the latest software and current software you are currently using. If the upgrade is needed, it will display as "Upgrade will stop all applications and take a long time".
   * Upgrade now: It stops all program and upgrade the software.   * Upgrade now: It stops all program and upgrade the software.
 +
 <note important>CAUTION: The upgrade may require a long time, the power should be on in the mean time upgrading.</note> <note important>CAUTION: The upgrade may require a long time, the power should be on in the mean time upgrading.</note>
 +
   * Cancel: Go back to the home screen.   * Cancel: Go back to the home screen.
  
 If you have to upgrade mandatory, Eunhasu shows pop-up window to notify. If you have to upgrade mandatory, Eunhasu shows pop-up window to notify.
  
-{{ :en:스크린샷_2016-11-14_14.52.37.png?400 | mandatory update}}+{{  :en:스크린샷_2016-11-14_14.52.37.png?400  }}
  
 ===== Roon Ready Usage ===== ===== Roon Ready Usage =====
-Mouse over the Roon Ready icon and then the action buttons will appear. On the smart devices, touch over the Roon Ready icon and then the action buttons will appear like when using a mouse.  
-By using the action buttons, you can start, stop, restart or configure Roon Ready. 
  
-{{ :en:스크린샷_2016-11-14_14.42.51.png?400 | roon ready }}+Mouse over the Roon Ready icon and then the action buttons will appear. On the smart devices, touch over the Roon Ready icon and then the action buttons will appear like when using a mouse. By using the action buttons, you can start, stop, restart or configure Roon Ready.
  
-{{:en:capture_20161114154453.png?16 |start}} Click start button to start Roon Ready. 'Active' sign will be displaying under the Roon Ready icon once Roon Ready is started and running.+{{  :en:스크린샷_2016-11-14_14.42.51.png?400  }}
  
-{{:en:capture_20161114154528.png?16 |stop}} Click stop button to stop Roon Ready.+{{:en:capture_20161114154453.png?16  }}Click start button to start Roon Ready. 'Active' sign will be displaying under the Roon Ready icon once Roon Ready is started and running.
  
-{{:en:capture_20161114154623.png?16 |restart}}Click restart button to stop and then start Roon Ready.+{{:en:capture_20161114154528.png?16  }}Click stop button to stop Roon Ready.
  
-{{:en:capture_20161114154705.png?16 |config}}Click config button to move to Roon Ready config screen.+{{:en:capture_20161114154623.png?16  }}Click restart button to stop and then start Roon Ready.
  
-{{ :en:스크린샷_2016-11-14_14.44.31.png?400 | roon ready config }}+{{:en:capture_20161114154705.png?16  }}Click config button to move to Roon Ready config screen. 
 + 
 +{{  :en:스크린샷_2016-11-14_14.44.31.png?400  }}
  
   * Audio device config: The config information of all USB DACs connected to sMS-200 is displaying.   * Audio device config: The config information of all USB DACs connected to sMS-200 is displaying.
-    * The chosen USB DAC is displaying in the light green box with the selected radio button in front and other available USB DACs are displaying in the light blue box. +      * The chosen USB DAC is displaying in the light green box with the selected radio button in front and other available USB DACs are displaying in the light blue box. 
-    * Select a radio button of USB DAC which is going to use and click ‘Save changes’ to use the USB DAC.+      * Select a radio button of USB DAC which is going to use and click ‘Save changes’ to use the USB DAC.
   * DSD mode: Choose one of DSD playback mode among NONE, NATIVE, DOP, DCS, NATIVE / DOP, NATIVE / DCS which USB DAC can support.   * DSD mode: Choose one of DSD playback mode among NONE, NATIVE, DOP, DCS, NATIVE / DOP, NATIVE / DCS which USB DAC can support.
   * DSD rate: Choose one of DSD music file rate among x64, x128 or x256 which USB DAC can support.   * DSD rate: Choose one of DSD music file rate among x64, x128 or x256 which USB DAC can support.
Line 123: Line 136:
   * Cancel: Go back to the home screen.   * Cancel: Go back to the home screen.
  
-===== Roon Server 사용법 ===== +===== Roon Server Usage ===== 
-Roon Server is one of sMS-1000's features. Mouse over the Roon Server icon and then the action buttons will appear. On the smart devices, touch over the Roon Server icon and then the action buttons will appear like when using a mouse. By using the action buttons, you can start, stop or restart Roon Server. Roon Server is used by Roon Control after starting Roon Server. + 
-{{  :en:스크린샷_2016-11-22_15.55.39-fullpage.png?400  }}+Roon Server is one of sMS-1000's features. Mouse over the Roon Server icon and then the action buttons will appear. On the smart devices, touch over the Roon Server icon and then the action buttons will appear like when using a mouse. By using the action buttons, you can start, stop or restart Roon Server. Roon Server is used by Roon Control after starting Roon Server. {{  :en:스크린샷_2016-11-22_15.55.39-fullpage.png?400  }}
  
 {{:en:capture_20161114154453.png?16  }}Click start button to start Roon Server . 'Active' sign will be displaying under the Roon Server icon once Roon Server is started and running. {{:en:capture_20161114154453.png?16  }}Click start button to start Roon Server . 'Active' sign will be displaying under the Roon Server icon once Roon Server is started and running.
Line 133: Line 146:
 {{:en:capture_20161114154623.png?16  }}Click restart button to stop and then start Roon Server. {{:en:capture_20161114154623.png?16  }}Click restart button to stop and then start Roon Server.
  
-===== MinimServer 사용법 ===== +===== MinimServer Usage ===== 
-MinimServer is one of sMS-1000's features. MinimServer should be installed by user. Installation is available in MinimServer config page. + 
-{{ :en:스크린샷_2016-11-22_15.31.42-fullpage.png?400 |}}+MinimServer is one of sMS-1000's features. MinimServer should be installed by user. Installation is available in MinimServer config page. {{  :en:스크린샷_2016-11-22_15.31.42-fullpage.png?400  }} 
 + 
 +==== MinimServer Control ====
  
-==== MinimServer 제어 ==== +MinimServer can be controlled in MinimServer config such as start, open, stop or restart after installation done. {{  :en:스크린샷_2016-11-22_15.31.31-fullpage.png?400  }}Content directory of MinimServer setting has to be set in MinimServer config page which could be open after start MinimServer. {{  :en:capture_20161123101754.png?400  }}First to use, you have to accept MinimServer license terms. {{  :en:이미지_sotm-lsh_201610311435.png?400  }}{{  :en:이미지_sotm-lsh_201610311437.png?400  }}<note important>Content directory is /mw/data/music in sMS system.</note>
-MinimServer can be controlled in MinimServer config such as start, open, stop or restart after installation done. +
-{{ :en:스크린샷_2016-11-22_15.31.31-fullpage.png?400 |}} +
-Content directory of MinimServer setting has to be set in MinimServer config page which could be open after start MinimServer. +
-{{ :en:capture_20161123101754.png?400 |}} +
-First to use, you have to accept MinimServer license terms. +
-{{ :en:이미지_sotm-lsh_201610311435.png?400 |}} +
-{{ :en:이미지_sotm-lsh_201610311437.png?400 |}} +
-<note important>Content directory is /mw/data/music in sMS system.</note>+
  
 ===== Squeezelite Usage ===== ===== Squeezelite Usage =====
 +
 Mouse over the Squeezelite icon and the action buttons will appear. On the smart devices, touch over the Squeezelite icon and the action buttons will appear like when using a mouse. By using the action buttons, you can start, stop, Open LMS web interface, restart or configure Squeezelite. Mouse over the Squeezelite icon and the action buttons will appear. On the smart devices, touch over the Squeezelite icon and the action buttons will appear like when using a mouse. By using the action buttons, you can start, stop, Open LMS web interface, restart or configure Squeezelite.
  
-{{ :en:스크린샷_2016-11-14_14.55.47.png?400 | Squeezelite }}+{{  :en:스크린샷_2016-11-14_14.55.47.png?400  }}
  
-{{:en:capture_20161114154453.png?16 |start}} Click start button to start Squeezelite and Logitech Media Server. 'Active' sign will be displaying under the Squeezelite icon once Squeezelite is started and running. When starting Squeezelite, it will take around 30 seconds because Logitech Media Server is also starting together.+{{:en:capture_20161114154453.png?16  }}Click start button to start Squeezelite and Logitech Media Server. 'Active' sign will be displaying under the Squeezelite icon once Squeezelite is started and running. When starting Squeezelite, it will take around 30 seconds because Logitech Media Server is also starting together.
  
-{{:en:capture_20161114154528.png?16 |stop}} Click stop button to stop Squeezelite and Logitech Media Server.+{{:en:capture_20161114154528.png?16  }}Click stop button to stop Squeezelite and Logitech Media Server.
  
-{{:en:capture_20161114154623.png?16 |restart}} Click restart button to stop Squeezelite and Logitech Media Server and then restart.+{{:en:capture_20161114154623.png?16  }}Click restart button to stop Squeezelite and Logitech Media Server and then restart.
  
-{{:en:capture_20161114154417.png?16 |open}} Click open LMS web interface button to open LMS web remote control running on sMS-200 in the new browser and then you will be able to browse and play music file.+{{:en:capture_20161114154417.png?16  }}Click open LMS web interface button to open LMS web remote control running on sMS-200 in the new browser and then you will be able to browse and play music file.
  
-{{:en:capture_20161114154705.png?16 |config}} Click config button to move to Squeezelite config screen.+{{:en:capture_20161114154705.png?16  }}Click config button to move to Squeezelite config screen.
  
-{{ :en:스크린샷_2016-11-14_14.56.24.png?400 | squeezelite config }}+{{  :en:스크린샷_2016-11-14_14.56.24.png?400  }}
  
   * Name: A name of sMS-200’s Squeezelite appearing on Logitech Media Server.   * Name: A name of sMS-200’s Squeezelite appearing on Logitech Media Server.
   * Audio device config: The config information of all USB DACs connected to sMS-200 is displaying.   * Audio device config: The config information of all USB DACs connected to sMS-200 is displaying.
-    * The chosen USB DAC is displaying in the light green box with the selected radio button in front and other available USB DACs are displaying in the light blue box. +      * The chosen USB DAC is displaying in the light green box with the selected radio button in front and other available USB DACs are displaying in the light blue box. 
-    * Select a radio button of USB DAC which is going to use and click ‘Save changes’ to use the USB DAC.+      * Select a radio button of USB DAC which is going to use and click ‘Save changes’ to use the USB DAC.
   * DOP or PCM convert: Check for using DOP function while playing DSD music file, uncheck for using DSD to PCM converting while playing DSD music file.   * DOP or PCM convert: Check for using DOP function while playing DSD music file, uncheck for using DSD to PCM converting while playing DSD music file.
   * Save changes: Save the information you entered or modified, and Squeezelite and Logitech Media Server will automatically restart if Squeezelite is started and running.   * Save changes: Save the information you entered or modified, and Squeezelite and Logitech Media Server will automatically restart if Squeezelite is started and running.
-    * Restart will take around 30 seconds.+      * Restart will take around 30 seconds.
   * Cancel: Go back to the home screen.   * Cancel: Go back to the home screen.
  
 ===== MPD & DLNA Usage ===== ===== MPD & DLNA Usage =====
 +
 Mouse over the MPD & DLNA icon and then the action buttons will appear. On the smart devices, touch over the MPD & DLNA icon and then the action buttons will appear like when using a mouse. By using the action buttons, you can start, stop, restart or configure MPD & DLNA. Mouse over the MPD & DLNA icon and then the action buttons will appear. On the smart devices, touch over the MPD & DLNA icon and then the action buttons will appear like when using a mouse. By using the action buttons, you can start, stop, restart or configure MPD & DLNA.
  
-{{ :en:스크린샷_2016-11-14_14.57.23.png?400 | mpd}}+{{  :en:스크린샷_2016-11-14_14.57.23.png?400  }}
  
-{{:en:capture_20161114154453.png?16 |start}} Click start button to activate MPD & DLNA. 'Active' sign will be displaying under the MPD & DLNA icon once MPD & DLNA is started and running. +{{:en:capture_20161114154453.png?16  }}Click start button to activate MPD & DLNA. 'Active' sign will be displaying under the MPD & DLNA icon once MPD & DLNA is started and running.
  
-{{:en:capture_20161114154528.png?16 |stop}} Click stop button to halt MPD & DLNA.+{{:en:capture_20161114154528.png?16  }}Click stop button to halt MPD & DLNA.
  
-{{:en:capture_20161114154623.png?16 |restart}} Click restart button to stop MPD & DLNA and then restart.+{{:en:capture_20161114154623.png?16  }}Click restart button to stop MPD & DLNA and then restart.
  
-{{:en:capture_20161114154705.png?16 |config}} Click config button to move to MPD & DLNA config screen.+{{:en:capture_20161114154705.png?16  }}Click config button to move to MPD & DLNA config screen.
  
-{{ :en:스크린샷_2016-11-14_14.57.57.png?400 | mpd config}}+{{  :en:스크린샷_2016-11-14_14.57.57.png?400  }}
  
   * Name: A name of sMS-200's MPD & DLNA appearing on MPD controlling App and DLNA controlling App.   * Name: A name of sMS-200's MPD & DLNA appearing on MPD controlling App and DLNA controlling App.
   * Audio device config: The config information of all USB DACs connected to sMS-200 is displaying.   * Audio device config: The config information of all USB DACs connected to sMS-200 is displaying.
-    * The chosen USB DAC is displaying in the light green box with the selected radio button in front and other available USB DACs are displaying in the light blue box. +      * The chosen USB DAC is displaying in the light green box with the selected radio button in front and other available USB DACs are displaying in the light blue box. 
-    * Select a radio button of USB DAC which is going to use and click 'Save changes' to use the USB DAC.+      * Select a radio button of USB DAC which is going to use and click 'Save changes' to use the USB DAC.
   * DOP enable: Check for using DOP function while playing DSD music file.   * DOP enable: Check for using DOP function while playing DSD music file.
   * Replay gain: Choose Replay gain among None, Album or Track.   * Replay gain: Choose Replay gain among None, Album or Track.
Line 200: Line 209:
  
 ===== HQPlayer NAA Usage ===== ===== HQPlayer NAA Usage =====
 +
 Mouse over the HQPlayer NAA icon and then the action buttons will appear. On the smart devices, touch over the HQPlayer NAA icon and then the action buttons will appear like when using a mouse. By using the action buttons, you can start, stop, restart or configure HQPlayer NAA. Mouse over the HQPlayer NAA icon and then the action buttons will appear. On the smart devices, touch over the HQPlayer NAA icon and then the action buttons will appear like when using a mouse. By using the action buttons, you can start, stop, restart or configure HQPlayer NAA.
  
-{{ :en:스크린샷_2016-11-14_14.58.49.png?400 | hqplayer naa }}+{{  :en:스크린샷_2016-11-14_14.58.49.png?400  }}
  
-{{:en:capture_20161114154453.png?16 |start}} Click start button to activate HQPlayer NAA. 'Active' sign will be displaying under the HQPlayer NAA icon once HQPlayer NAA is started and running. +{{:en:capture_20161114154453.png?16  }}Click start button to activate HQPlayer NAA. 'Active' sign will be displaying under the HQPlayer NAA icon once HQPlayer NAA is started and running.
  
-{{:en:capture_20161114154528.png?16 |stop}} Click stop button to halt HQPlayer NAA.+{{:en:capture_20161114154528.png?16  }}Click stop button to halt HQPlayer NAA.
  
-{{:en:capture_20161114154623.png?16 |restart}} Click restart button to stop HQPlayer NAA and then restart.+{{:en:capture_20161114154623.png?16  }}Click restart button to stop HQPlayer NAA and then restart.
  
-{{:en:capture_20161114154705.png?16 |config}} Click config button to move to HQPlayer NAA config screen.+{{:en:capture_20161114154705.png?16  }}Click config button to move to HQPlayer NAA config screen.
  
-{{ :en:스크린샷_2016-11-14_15.00.03.png?400 | hqplayer naa config }}+{{  :en:스크린샷_2016-11-14_15.00.03.png?400  }}
  
   * Name: A name of sMS-200’s HQPlayer NAA appearing on HQPlayer Desktop.   * Name: A name of sMS-200’s HQPlayer NAA appearing on HQPlayer Desktop.
Line 219: Line 229:
  
 ===== Shairport Usage ===== ===== Shairport Usage =====
 +
 Mouse over the Shairport icon and then the action buttons will appear. On the smart devices, touch over the Shairport icon and then the action buttons will appear like when using a mouse. By using the action buttons, you can start, stop, restart or configure Shairport. Mouse over the Shairport icon and then the action buttons will appear. On the smart devices, touch over the Shairport icon and then the action buttons will appear like when using a mouse. By using the action buttons, you can start, stop, restart or configure Shairport.
  
-{{ :en:스크린샷_2016-11-14_15.01.17.png?400 | shairport }}+{{  :en:스크린샷_2016-11-14_15.01.17.png?400  }}
  
-{{:en:capture_20161114154453.png?16 |start}} Click start button to activate Shairport. 'Active' sign will be displaying under the Shairport icon once Shairport is started and running. +{{:en:capture_20161114154453.png?16  }}Click start button to activate Shairport. 'Active' sign will be displaying under the Shairport icon once Shairport is started and running.
  
-{{:en:capture_20161114154528.png?16 |stop}} Click stop button to halt Shairport.+{{:en:capture_20161114154528.png?16  }}Click stop button to halt Shairport.
  
-{{:en:capture_20161114154623.png?16 |restart}} Click restart button to stop Shairport and then restart.+{{:en:capture_20161114154623.png?16  }}Click restart button to stop Shairport and then restart.
  
-{{:en:capture_20161114154705.png?16 |config}} Click config button to move to Shairport config screen.+{{:en:capture_20161114154705.png?16  }}Click config button to move to Shairport config screen.
  
-{{ :en:스크린샷_2016-11-14_15.01.26.png?400 | shairport config}}+{{  :en:스크린샷_2016-11-14_15.01.26.png?400  }}
  
   * Name: A name of sMS-200’s Shairport appearing on Apple’s iDevice.   * Name: A name of sMS-200’s Shairport appearing on Apple’s iDevice.
   * Audio device config: The config information of all USB DACs connected to sMS-200 is displaying.   * Audio device config: The config information of all USB DACs connected to sMS-200 is displaying.
-    * The chosen USB DAC is displaying in the light green box with the selected radio button in front and other available USB DACs are displaying in the light blue box. +      * The chosen USB DAC is displaying in the light green box with the selected radio button in front and other available USB DACs are displaying in the light blue box. 
-    * Select a radio button of USB DAC which is going to use and click ‘Save changes’ to use the USB DAC.+      * Select a radio button of USB DAC which is going to use and click ‘Save changes’ to use the USB DAC.
   * Save changes: Save the information you entered or modified.   * Save changes: Save the information you entered or modified.
   * Cancel: Go back to the home screen.   * Cancel: Go back to the home screen.
  
- ====== Precautionary Statement ======+====== Precautionary Statement ====== 
   * 2TB external storage is recommended. In test case, 4TB storage is working. However, to stable operation, user should use up to 2TB storage.   * 2TB external storage is recommended. In test case, 4TB storage is working. However, to stable operation, user should use up to 2TB storage.
   * Recommend using one of USB ports only. If you use several USB ports at the same time, sound quality may degrade.   * Recommend using one of USB ports only. If you use several USB ports at the same time, sound quality may degrade.
   * Working well in IPv4 network environment.   * Working well in IPv4 network environment.
 +
 +
Last modified: 2016/11/22 22:33

Copyright © 2008-2017 SOtM. All rights reserved.