mBPS-d2s Battery Replacement Manual

<note important>
**CAUTION**
  * If circumstances allow, ask replacement to distributor or retail shop.
  * Be careful not to overtighten screws.
  * Please recycle your used batteries that have explosion risk
</note>

{{ :en:capture_20161117121022.png |}}
Remove eight Torx screws carefully 

{{ :en:capture_20161117121045.png |}}
Remove the LED ribbon cable by pulling down

{{ :en:capture_20161117121104.png |}}
  - Remove the two connectors which are placed in front of the batteries by pulling down
  - Pry the battery packs off the back plate carefully by using tools such as straight razor
  - Remove residual tape on the back-plate

{{ :en:capture_20161117121120.png |}}
Remove backing on the two way tape from the new battery; center carefully on the board and make a little space between two batteries

{{ :en:capture_20161117121138.png |}}
Plug the battery terminals in, and then screw every plates to complete replacement