1. Enter Webmin page by typing https://Eunhasu IP Address:10000/

A. Username: root , Password: sotmaudio
{{ :enter_webmin_page.png |}}

2. Click Webmin -> Hardware -> Partitions on Local Disks, and then check the additional disk.	
{{ :check_the_additional_disk.png |}}
			
3. Click the Cread Parition Table.
{{ :cread_parition_table.png |}}
				
4. Choose GPT for Partition table format and then click Wipe and Re-Label.
{{ :choose_gpt_for_partition_table_forma.png |}}
			
5. Then, click Add primary partition.
{{ :add_primary_partition.png |}}
			
6. Select Type to Linux EXT and click the Create button.
{{ :select_type_to_linux_ext.png |}}	
			
7. Click the partition number.
{{ :partition_number.png |}}
			
8. Select the New Linux Native (ext4) and then click the Create Filesystem button.
{{ :new_linux_native.png |}}
			
9. Wait about 20seconds and click Return to disk list.
{{ :returnto_disk_list.png |}}
			
10. Enter /mw/data/music/<name> as an example below, and choose ext14 then click the Mount Partition On button.
{{ :mount_partition.png |}}
			
11. Select the disk that you added in Partition with ID section and check Yes for "Continue boot even if mount fails?" and then click the Create button.
{{ :ko:11partition_with_id.png |}}
							
12. Now, you can check the disk is now mounted in the designated path.
{{ :ko:12donediskmount.png |{{ :done_process.png |}}
	
13. Go to check Mount status at Webmin -> System -> Disk and Network Filesystems after the reboot. 
{{ :undefined:13rebootforcheckup.png |}}

14. Access sMB-Q370 by using SSH program(Putty) 
A. Enter the IP addres to be accesible to the sMB-Q370
{{ :ko:14aputty.png |}}

B. ID : root, PW : sotmaudio(when entering the password, the letters won't be shown.)
{{ :ko:14brootlogin.png |}}

C. Use the following command to disable webmin.
a. systemctl stop webmin
b. systemctl disable webmin
{{ :ko:14cdiable_webmin.png |}}